ARCOM

Search or browse again.

Click on the titles below to expand the information about each abstract.
Viewing 30 results ...

Adeyemi, B S and Aigbavboa, C O (2020) Conflict factors investigation among construction professionals in Nigeria. Journal of Engineering, Design and Technology , 18(05), 1121–37.

Aghimien, D O, Aigbavboa, C O, Oke, A E and Thwala, W D (2019) Mapping out research focus for robotics and automation research in construction-related studies. Journal of Engineering, Design and Technology , 18(05), 1063–79.

Arowoiya, V A, Oke, A E, Aigbavboa, C O and Aliu, J (2020) An appraisal of the adoption internet of things (IoT) elements for sustainable construction. Journal of Engineering, Design and Technology, 18(05), 1193–208.

• Type: Journal Article
• Keywords: Communication; Construction projects; Internet of things; Smart cities; Technology; Network structure;
• ISBN/ISSN: 1726-0531
• URL: https://doi.org/10.1108/JEDT-10-2019-0270
• Abstract:
  The purpose of this paper is to assess the adoption of internet of things (IoT) element with the view of increasing usage so that benefits of convenience, increased performance and timely completion of work can be improved. This research was conducted so that there can be increase in the usage of IoT elements for construction performance and sustainability. The study adopted survey design and various construction professionals were used to assessing the level of adoption of IoT elements. Convenience sample was used by distributing the structured questionnaire to registered professionals. Mean score, bar chart, Kruskal–Wallis H test, one-sample t-test and Shapiro–Wilk were used for analyzing the data gathered. The findings revealed that wireless fidelity, visualization, wireless sensor networks, Bluetooth, electronic product code and internet protocol are the most adopted element of IoT in the industry. The study also shows that there are areas where there is no significance attached by construction professionals in the usage of IoT elements. These are data storage and analytics, barcode, Zigbee, gateway, near field communication and actuators. It is recommended that less significant areas can be improved through training and educating professionals about the whole concept of IoT and other design professionals. When the importance of IoT elements are understood it will help in the level of adoption. This paper highlights the possible ways of increasing the adoption of IoT elements with a view to achieving better usage for convenience, high productivity of workers and easy access to information.

Asad, M M, Hassan, R B, Sherwani, F, Rind, I A and Maiji, Y (2019) Development of a novel safety and health educational management information system (HAZ-PRO) for oil and gas production operation. Journal of Engineering, Design and Technology , 18(05), 959–71.

Blindheim, J, Elverum, C W, Welo, T and Steinert, M (2020) Concept evaluation in new product development. Journal of Engineering, Design and Technology , 18(05), 1139–51.

Borer, J (2020) Object oriented design of safety critical programmable equipment systems. Journal of Engineering, Design and Technology , 18(05), 1081–9.

Chaparro, D A, Ying, F J, Rotimi, F E and Egbelakin, T (2020) Commute and labour productivity: investigation of inner city construction sites. Journal of Engineering, Design and Technology , 18(05), 1305–19.

Dave, N, Sahu, V and Misra, A K (2020) Development of geopolymer cement concrete for highway infrastructure applications. Journal of Engineering, Design and Technology , 18(05), 1321–33.

Davila Delgado, J M and Oyedele, L O (2020) BIM data model requirements for asset monitoring and the circular economy. Journal of Engineering, Design and Technology , 18(05), 1269–85.

Derradji, R and Hamzi, R (2020) Multi-criterion analysis based on integrated process-risk optimization. Journal of Engineering, Design and Technology , 18(05), 1015–35.

Eziefula, U G, Opara, H E and Eziefula, B I (2020) Strength of concrete produced with different sources of aggregates from selected parts of Abia and Imo States of Nigeria. Journal of Engineering, Design and Technology , 18(05), 1053–61.

Fei, C, Xiahou, P and Wang, F (2020) Design and control of grid connected inverter for harmonic suppression. Journal of Engineering, Design and Technology , 18(05), 1349–56.

Gamil, Y, A. Abdullah, M, Abd Rahman, I and Asad, M M (2020) Internet of things in construction industry revolution 4.0. Journal of Engineering, Design and Technology , 18(05), 1091–102.

Gbadamosi, S L and Nwulu, N I (2020) Optimal planning of renewable energy systems for power loss reduction in transmission expansion planning. Journal of Engineering, Design and Technology , 18(05), 1209–22.

Gharehbaghi, K, McManus, K, Hurst, N, Robson, K and Myers, M (2019) Complexities in mega rail transportation projects. Journal of Engineering, Design and Technology , 18(05), 973–90.

Gupta, N K and Thakre, G D (2020) Dry sliding wear performance on self-healing Al6061 composites. Journal of Engineering, Design and Technology , 18(05), 1357–70.

Jun, Z, Akbar, M A and Xin lei, W (2020) Optimization of design and measurement principle of six-components force/thrust measurement stand. Journal of Engineering, Design and Technology , 18(05), 1371–9.

Khamseh, A and Marei, P (2020) Designing a model developed to assess the capabilities of technological innovation in Iranian construction of power plant equipment industries. Journal of Engineering, Design and Technology , 18(05), 1241–9.

Li, H, Xia, Q, Wang, L and Ma, Y (2020) Sustainability assessment of urban water environment treatment public-private partnership projects using fuzzy logic. Journal of Engineering, Design and Technology , 18(05), 1251–67.

Mbae, A M and Nwulu, N I (2020) Day-ahead load forecasting using improved grey Verhulst model. Journal of Engineering, Design and Technology , 18(05), 1335–48.

Okampo, E J and Nwulu, N I (2020) Optimal energy mix for a reverse osmosis desalination unit considering demand response. Journal of Engineering, Design and Technology , 18(05), 1287–303.

Osman, B and Zhu, H (2020) A virtual educational model on a CNC milling machine including and excluding two methods of fuzzy controllers. Journal of Engineering, Design and Technology , 18(05), 1153–63.

Sibanda, V, Mpofu, K, Trimble, J and Kanganga, M (2019) Development of part families for a reconfigurable machine. Journal of Engineering, Design and Technology , 18(05), 991–1014.

Singh, T, Kalra, M and Misra, A K (2020) Simplified probabilistic seismic assessment of dampers in tall and braced structures in buildings. Journal of Engineering, Design and Technology , 18(05), 1037–52.

Wang, L (2020) Home intelligent lighting control system based on wireless sensor. Journal of Engineering, Design and Technology , 18(05), 1231–40.

Woju, U W and Balu, A (2020) Fuzzy uncertainty and its applications in reinforced concrete structures. Journal of Engineering, Design and Technology , 18(05), 1175–91.

Woju, U W and Balu, A (2020) Time-dependent safety performance of reinforced concrete structures. Journal of Engineering, Design and Technology , 18(05), 1103–20.

Xia, Y (2020) Research on dynamic data monitoring of steel structure building information using BIM. Journal of Engineering, Design and Technology , 18(05), 1165–73.

Yan, J (2020) 3D printing optimization algorithm based on back-propagation neural network. Journal of Engineering, Design and Technology , 18(05), 1223–30.

Zadok, Y (2019) Project-based learning in robotics meets junior high school. Journal of Engineering, Design and Technology , 18(05), 941–58.